Brand new door rubbers ,,Wont close now
#1
Member
Thread Starter
Brand new door rubbers ,,Wont close now
Bought Brand New Door Rubbers from summit, quality is very good.
Had the car painted few months ago,, decided to replace ALL the door rubbers,, EVERYTHING went on perfect now doors wont close and i dont close or even look like closing,, 3 inches from closure the new rubbers kick in and i a not forcing the door or cutting the new rubbers.
where to next.
Had the car painted few months ago,, decided to replace ALL the door rubbers,, EVERYTHING went on perfect now doors wont close and i dont close or even look like closing,, 3 inches from closure the new rubbers kick in and i a not forcing the door or cutting the new rubbers.
where to next.
#2
Supreme Member
Join Date: Jun 2015
Location: Austin, TX
Posts: 1,923
Received 178 Likes
on
136 Posts
Car: 90 Formula / T-tops
Engine: 305 TPI
Transmission: MD8
Re: Brand new door rubbers ,,Wont close now
Are you referring to the seals that are mounted to the inside of the door and wrap around it starting from the mirror all the way down, under and back up to the door latch and proceed to the top? they should be very soft and spongy. got photos?
#3
Member
Thread Starter
Re: Brand new door rubbers ,,Wont close now
There the ones..
The doors are aligned perfect with all the gaps 100% correct.
There brand new and i put grease on the front part near the side mirror end of the rubber.
The section on the right is the problem..screw holes lined up perfect though, all the fasteners fitted perfect, all the plastic plugs went in correct
Tight as an old boot...door wont close
#4
Member
Thread Starter
Re: Brand new door rubbers ,,Wont close now
All this chinese stuff is crap..AND its not cheap either.
i have see chrome dip sticks where the chrome flaked off and got under a bearing.
chinese dipstick $15
New motor $4500
i have see chrome dip sticks where the chrome flaked off and got under a bearing.
chinese dipstick $15
New motor $4500
#5
Supreme Member
Join Date: Jun 2015
Location: Austin, TX
Posts: 1,923
Received 178 Likes
on
136 Posts
Car: 90 Formula / T-tops
Engine: 305 TPI
Transmission: MD8
Re: Brand new door rubbers ,,Wont close now
hard to tell from the photos, but the rubber should be kind of like foam. not rubbery, but very soft rubber. can you squeeze it in easily?
#6
Senior Member
iTrader: (9)
Join Date: Jul 2003
Location: DFW
Posts: 582
Received 200 Likes
on
142 Posts
Car: 90 Formula 350
Engine: 350
Transmission: 700r4
Axle/Gears: Dana 44 3.54
Re: Brand new door rubbers ,,Wont close now
I just did new door seals, window seals and sweeps and its really hard to close with window up and easier with window down a bit this should ease as seals get used to the pressure
#7
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,827
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: Brand new door rubbers ,,Wont close now
slam the door closed and leave it closed for a few days
that shoul solve your dilemma
that shoul solve your dilemma
Trending Topics
#8
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,734
Received 795 Likes
on
528 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Brand new door rubbers ,,Wont close now
Fairchild is the brand closest to oem fit look and feel.
#9
Senior Member
Re: Brand new door rubbers ,,Wont close now
I ordered a pair of Goodmark GMK402242582P door seals to try. When they arrived there was a Goodmark sticker on a set of Soffseal seals. I am kinda disappointed because I have used the Soffseal in the past and found them stiff and oversized.
But to find any door seals right now can be difficult so I will keep them and use them.
I do have a set of Fairchild t-top seals coming though.
But to find any door seals right now can be difficult so I will keep them and use them.
I do have a set of Fairchild t-top seals coming though.
Thread
Thread Starter
Forum
Replies
Last Post