upper and lower door hinge
08-17-2014, 12:55 PM
#1
Member
Thread Starter
Join Date: Aug 2010
Location: California
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: v6 :/
Transmission: auto
upper and lower door hinge
i went through a couple threads but still not sure
driver door sagging and cutting into rocker panel and creaks and pops when opening or closing, but upper and lower hinges all need replacing. ive looked around and seen a few things i need to buy but no luck with the roller pin on the bottom hinge, mine looks like an egg right now, broke to hell.
basically looking to where i can get all the replacement parts for upper and lower hinges
driver door sagging and cutting into rocker panel and creaks and pops when opening or closing, but upper and lower hinges all need replacing. ive looked around and seen a few things i need to buy but no luck with the roller pin on the bottom hinge, mine looks like an egg right now, broke to hell.
basically looking to where i can get all the replacement parts for upper and lower hinges
08-17-2014, 01:47 PM
#2
Supreme Member
Join Date: Jun 2006
Location: West-Central
Posts: 2,199
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Re: upper and lower door hinge
Rockauto has a cheap door hinge pin & bushing kit DORMAN 38401.
Top down solution has everything, high quality greasable or standard and the detent roller pin http://www.top-downsolutions.com/Bod...nterior?page=1
Make sure you have or buy the door spring compressor tool.
I recently did mine, here some treads with pics and tips
https://www.thirdgen.org/forums/body...or-hinges.html
https://www.thirdgen.org/forums/body...oller-pin.html
Top down solution has everything, high quality greasable or standard and the detent roller pin http://www.top-downsolutions.com/Bod...nterior?page=1
Make sure you have or buy the door spring compressor tool.
I recently did mine, here some treads with pics and tips
https://www.thirdgen.org/forums/body...or-hinges.html
https://www.thirdgen.org/forums/body...oller-pin.html
08-18-2014, 07:47 AM
#3
Supreme Member
Join Date: Jun 2011
Location: knoxville tn
Posts: 2,036
Likes: 0
Received 5 Likes
on
5 Posts
Car: 86 IROC
Engine: 5.0 TPI
Transmission: 700-R-4
Axle/Gears: 2.73 open
Re: upper and lower door hinge
i went through a couple threads but still not sure
driver door sagging and cutting into rocker panel and creaks and pops when opening or closing, but upper and lower hinges all need replacing. ive looked around and seen a few things i need to buy but no luck with the roller pin on the bottom hinge, mine looks like an egg right now, broke to hell.
basically looking to where i can get all the replacement parts for upper and lower hinges
driver door sagging and cutting into rocker panel and creaks and pops when opening or closing, but upper and lower hinges all need replacing. ive looked around and seen a few things i need to buy but no luck with the roller pin on the bottom hinge, mine looks like an egg right now, broke to hell.
basically looking to where i can get all the replacement parts for upper and lower hinges
08-18-2014, 08:25 AM
#4
Junior Member
Join Date: Apr 2014
Location: Ashmore, IL
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: !983 Z28
Engine: 355
Transmission: rebuilt 700R4
Axle/Gears: possi rear end
Re: upper and lower door hinge
I got mine from Camaro Central. took it to my local body shop and had them do it. I didn't have the equipment to hold the door while it was off. My doors are still off a little, but I will fix that with shims!! Good luck!!
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM