tvc 15

I got a used SMC Z28 hood and it has a insulated hood liner on it. Is it ok to remove it or could the heat possibly cause the hood to distort?

Scorpner

iTrader: (4)

I'm not sure if it would distort but they were discontinued due to separation issues. (There is a bonding material in-between the two halves.)

If you don't already know, you'll need lighter support struts as the stock ones for metal hood can cause them to fold in half. I've seen it happen more than once.

84 1LE

iTrader: (9)

I removed my liner years ago, no ill effects whatsoever.

Mine also separated around the same time.I fiberglassed it back together, as well no issues in 15+ years.

I'm using worn out steel hood struts.

tvc 15

Thanks for the info, but for the next dumb question. What years were the glass hoods used?

Scorpner

iTrader: (4)

I'm going to say 82-83 with 1984 switching to metal. Then louvers in 1985, and bubble sometime after that.

rgrking

The insulation stuff under your hood is really for one purpose. It is a piece that drops if there is a fire in your engine compartment. The plastic pins that hold it in have a lower melting point.