MassD

iTrader: (1)

Hey guys i recently purchased a set of gold cross laced GTA rims. I got a good deal on em but they need some TLC. So i decided to sand the lips down eventually. Now im in the processes of planning everything out. I plan on doing what this guy did http://www.gmtips.com/3rd-degree/dox...els/wheels.htm . But idk if i should repaint the centers. Im 15 and am on a budget. I can afford to paint them with some quality spray paint and that is about it. Will it come out okay or is it B**CH to get the paint evenly on the rim. I know to use some etching primer, but what paint should i get that is good quality and matches the original gold color. Something that is durable. And should i paint em???
Thanks

MassD

iTrader: (1)

Bump

//<86TA>\\

iTrader: (14)

wait at least 24hrs before bumping a thread, patience

just pick up some wheel paint, its not that expensive. If you tape everything off, it will look great when you are done. Just make sure the centers are clean and degreased before you paint or it will fish-eye.

I just did a set of gta wheels over the winter, they came out pretty nice. The bare aluminum lip needs to be sealed, not painted. Most clear coat will not stick to bare metal, you would have to fine clear paint. good luck

i used Zoopseal on the lips, working well so far, but its not cheap.

MassD

iTrader: (1)

I wasn't planning on painting the lip I was ganna polish it. Sorry for the bump I am impatient lol

MassD

iTrader: (1)

Btw what paint did u use

Daytona_83

Holy friggin crap, that wheel that guy did in your link turned out superb! Wowzers!

FYRCHKN

Mine started out gold, but I used Rustoleum rattle can gloss black on mine about 2 years ago. They still look great.

MassD

iTrader: (1)

Yea rustoleum makes good stuff but i need gold and i dont think they have gold.

dtedrow

just a quick question here but what is the best way to get built up brake dust off gold laced gta rims, im afraid if i scrub the rims the gold paint will come off

2007xl50

Sand the lips with say 400-600 to start work your way up to 2000 grit, now sand the crosslace sections with 400-600, maybe work up to like 800. clean the wheels good, once nice and dry tape off the lips and paint the crosslace sections with a good spay paint. then polish the sanded lips and they should look killer.

mantaguy

iTrader: (5)

I picked up a set of red ones about a year ago
and redid them in White


I did all the things that fellow did in the site you have listed except polishing(I'll do that now since my car is back from the paint shop).I think I only used 3 cans of Dupli-Color Perfect Match WA8554 White(same color as car),you need to apply multiple fine coats,you Don't want to load it up and have runs and drips.Take your time between coats and let it dry according to the directions(BE PATIENT,DON'T RUSH)and everything will turn out with outstanding results

mantaguy

iTrader: (5)

Ceramic pads

6SIX6

iTrader: (35)

Look good in white man as ive never seen them painted that colour

MassD

iTrader: (1)

wow this came back from the dead, once my car is done being painted im going to a writeup on how to do them

1987_sportcoupe

Rustoleum wheel paint. It's cheap and if you take the time to do good prep work they'll come out great. I spent a weekend sanding down my camaro rims. Then a coat of primer, couple coats of black wheel paint followed up by a couple coats of clear. Just remember the better job you do prepping the wheels the better your paint will look.