My weird detailing obsession and future projects.
#1
Moderator
Thread Starter
My weird detailing obsession and future projects.
Just ordered some new products!
I got some new polish and buffing pads to try and make the paint even better. I also got some high quality microfiber towels along with some of the best wax you can buy.
The Polish, The Pads, The Wax, The Spray on wax for in between waxes.
The rest of the detailing products:
And now to the projects:
Brake upgrade w/ hawk pads:
3.27 Gears:
New headliner:
Spohn SFC's:
There's a rather large storm going on outside right now. I'm really bored.
I got some new polish and buffing pads to try and make the paint even better. I also got some high quality microfiber towels along with some of the best wax you can buy.
The Polish, The Pads, The Wax, The Spray on wax for in between waxes.
The rest of the detailing products:
And now to the projects:
Brake upgrade w/ hawk pads:
3.27 Gears:
New headliner:
Spohn SFC's:
There's a rather large storm going on outside right now. I'm really bored.
Last edited by IROCThe5.7L; 06-08-2007 at 06:29 PM.
#2
Supreme Member
iTrader: (1)
Join Date: Mar 2004
Location: Pittsburgh & Allentown PA
Posts: 1,319
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Z28 (Heritage Edition)
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2.73 Posi
Re: My weird detailing obsession and future projects.
niceeeeee...
I've noticed that since my car has been garaged (unlike my RS) it doesn't need to be cleaned as much and therefore i have actually kinda been slackin w/ the detailing. besides a wash every week or two it doesn't get pampered too much. I need to put that moose wax to work again!
edit: my bad, forgot to say: Can't wait to see what you do with these new detailing products! Def. snap some pics!
I've noticed that since my car has been garaged (unlike my RS) it doesn't need to be cleaned as much and therefore i have actually kinda been slackin w/ the detailing. besides a wash every week or two it doesn't get pampered too much. I need to put that moose wax to work again!
edit: my bad, forgot to say: Can't wait to see what you do with these new detailing products! Def. snap some pics!
#3
Supreme Member
Join Date: Nov 2005
Location: Indianapolis
Posts: 1,975
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28 (sold)
Re: My weird detailing obsession and future projects.
spohn SFC's have to be welded everywhere they touch the floorpan, correct? i see u have the american thunder catback and a 3 inch cat, definetly tell me if u have fitment issues with the SFC's. i have practically the same set up.
btw, sometimes those rotors can be directional, so make sure u read the instructions
btw, sometimes those rotors can be directional, so make sure u read the instructions
#5
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: My weird detailing obsession and future projects.
Can't wait to see it finished...By the way what did those rotors run you if you don't mind?
#6
Supreme Member
iTrader: (17)
Join Date: Oct 2004
Posts: 2,086
Received 0 Likes
on
0 Posts
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Re: My weird detailing obsession and future projects.
I'm obsessed with detailing too! I have invested a lot of money in professional products and supplies and it's all worth it. I'm fixing to pick up some Clearkote Carnauba Moose Wax and Vanilla Moose so I can do a full detail on my car (you know the kind that takes all day to do). I've got some C5 brakes on the way and hopefully I can get my SFCs soon too.
#7
Supreme Member
iTrader: (10)
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,242
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi
Re: My weird detailing obsession and future projects.
Nothing like an all day detail...LOL and all cars look better when they have a clean new headliner in them. What kind did you get?
Trending Topics
#8
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
I use to like Gold Class, then realized there are a world of better products out there. I always wanted to try Nattys, but never have.
85maroz28 Can't wait to see it finished...By the way what did those rotors run you if you don't mind?
86NiteRider Nothing like an all day detail...LOL and all cars look better when they have a clean new headliner in them. What kind did you get?
Last edited by IROCThe5.7L; 06-10-2007 at 03:09 PM.
#9
Supreme Member
Join Date: Apr 2004
Location: MN
Posts: 2,139
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro SC (Supercool)
Engine: one composed of various metals
Re: My weird detailing obsession and future projects.
ooOOoo someone is going to be having some fun this summer
#10
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: My weird detailing obsession and future projects.
I use to like Gold Class, then realized there are a world of better products out there. I always wanted to try Nattys, but bever have.
The total was around $250, and $80 for the hawk pads
I am actually re doing the old one with my dad. We did one on my other car and it came out great.
The total was around $250, and $80 for the hawk pads
I am actually re doing the old one with my dad. We did one on my other car and it came out great.
Last edited by 85maroz28; 06-10-2007 at 06:56 PM.
#11
TGO Supporter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
Re: My weird detailing obsession and future projects.
Joe, let me know how the optimum works with your black paint. I heard Opti is a great product with no dusting at all! I believe its on the light side of paint cutting however... Opti Comp and Opti Hyper comp is more for the defects. Those LCC pads are wonderful and love them. Souveran is pricey but you cant beat the results I think you should try nattys, its cheap and gives the finish a really deep wet look!
#12
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
http://www.cquence.net/chevy-camaro-...482402e7a25fc7
The rotors I purchased are at the bottom "Chevy Camaro 1982-1997 2 Fr + 2 Rr Ultimate Cross Rotors".
Just a warning, they kill you on shipping.
Nick, Nattys in next on my list. It's pretty cheap, so it shouldn't be a problem adding it to the collection. I picked the OP because I need very minor correction, so I'm hopping that will do the job leaving me ready for LSP. I got an orange pad just in case I have trouble with a spot or two.
#14
Supreme Member
Join Date: Jul 2003
Location: Markham
Posts: 2,494
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro
Engine: 355ci
Transmission: TKO-600 5 speed
Axle/Gears: 3.73 10 bolt
Re: My weird detailing obsession and future projects.
im quite happy with my cquence rotors, was 40 bucks shipping all the way to canada
hah im more curious how much all the detailing stuff ran ya
hah im more curious how much all the detailing stuff ran ya
#15
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
#16
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
I just don't know when to stop :P
Another 2 hours of work tonight and my headliner will be done.
Another 2 hours of work tonight and my headliner will be done.
#17
Supreme Member
iTrader: (17)
Join Date: Oct 2004
Posts: 2,086
Received 0 Likes
on
0 Posts
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Re: My weird detailing obsession and future projects.
Let me know how that Machine Glaze works for you. I just bought some of the Carnauba Moose Wax and Vanilla Moose Hand Glaze (but I'm going to apply it with the PC). The guy I got them from told me that they use the Machine Glaze on their Nova show car and it is incredible, it just doesn't last very long.
#18
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: My weird detailing obsession and future projects.
Where are you getting the ClearKote? I am interested in getting some!
#19
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
I found the Clearkote products to be the cheapest here: http://www.specialtymotoring.com/ck-1021.html
He is a sponsor at svtperformance.com
True, thats why it's a good idea to put a layer of carnauba over it.
He is a sponsor at svtperformance.com
it is incredible, it just doesn't last very long.
#20
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: My weird detailing obsession and future projects.
Can't decide between the Clearkote killer combo or the 1-2 punch! Any opinions?
#21
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
I'd go with the Killer Combo. Esp if it is going to be used on a darker color such as your Trans Am (Which is a niceeeeeeeeeeeee looking car by the way).
Last edited by IROCThe5.7L; 06-20-2007 at 02:04 PM.
#22
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: My weird detailing obsession and future projects.
No it will actually be going on the white one. I don't have the GTA anymore but thanks for all the help!
#23
Supreme Member
iTrader: (17)
Join Date: Oct 2004
Posts: 2,086
Received 0 Likes
on
0 Posts
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Re: My weird detailing obsession and future projects.
I found the Clearkote products to be the cheapest here: http://www.specialtymotoring.com/ck-1021.html
He is a sponsor at svtperformance.com
True, thats why it's a good idea to put a layer of carnauba over it.
He is a sponsor at svtperformance.com
True, thats why it's a good idea to put a layer of carnauba over it.
#25
Moderator
Thread Starter
Re: My weird detailing obsession and future projects.
Man, I'd love to check out your car! I see in your sig you got it running My paints good, but I need some paint work this summer I've been going to Duffs the last couple weeks, have you been going?
Thread
Thread Starter
Forum
Replies
Last Post
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
Linson
Auto Detailing and Appearance
12
10-01-2015 09:50 PM