Full size Chevy truck headlight conv. - the Next step!
#1
Full size Chevy truck headlight conv. - the Next step!
So, now that FlyinLow has completed the Projector Headlight conversion - we're ready for the next step, right?
The question then is - who will be the first to do the Full Size Chevy Truck Halo headlight conversion
These are available with normal "mirror" type housing, as well as carbon fibre and gunmetal gray.
Here shown in Gunmetal gray:
It looks kinda...uhm....funky to me, so I am NOT doing it on my IROC nor my Tahoe.
Just thought I'd bring it out there as Im sure it will at some point anyway..
Ken
The question then is - who will be the first to do the Full Size Chevy Truck Halo headlight conversion
These are available with normal "mirror" type housing, as well as carbon fibre and gunmetal gray.
Here shown in Gunmetal gray:
It looks kinda...uhm....funky to me, so I am NOT doing it on my IROC nor my Tahoe.
Just thought I'd bring it out there as Im sure it will at some point anyway..
Ken
#3
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
I'm w/ jim on this one. Where did u find them I have never seen that style before!
#5
Supreme Member
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
My dad has a 1994 Chevy Silverado, and I measured his headlights the other day.
Personally I don't think they're wide enough and tall enough to look good on our cars. It would have alot of "empty space" around them.
I'm gonna swap in Celebrity lights or Monte LS lights instead.
Personally I don't think they're wide enough and tall enough to look good on our cars. It would have alot of "empty space" around them.
I'm gonna swap in Celebrity lights or Monte LS lights instead.
#6
The lights themselves are an interesting concept, but I can't picture those oval halos looking good?
I found them while searching for a set of projector lights for my Tahoe, and this is the site I found them on:
http://www.matrixracing-usa.com/brow...partment_ID=47
Price: $209.95
And here are the other two versions of those lights:
Carbon Fiber:
Regular Clear:
Ken
I found them while searching for a set of projector lights for my Tahoe, and this is the site I found them on:
http://www.matrixracing-usa.com/brow...partment_ID=47
Price: $209.95
And here are the other two versions of those lights:
Carbon Fiber:
Regular Clear:
Ken
Trending Topics
#8
Junior Member
Join Date: Mar 2002
Location: WV
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 5.7, Vortec heads, Headers, TBI
Transmission: Built 700R4
Axle/Gears: 3.23 BW 9-Bolt Disc Brake
i kinda like them but i dont think they look right on camaros but i found these on matrix racing they are astro lights they look bigger than the chevy truck lights im sure you guys mught have looked into them but if not i wonder if they will fill the gap better. there are other types there too for the astro
#11
Supreme Member
iTrader: (2)
Join Date: Jan 2001
Location: Tampa, FL, USA
Posts: 4,149
Likes: 0
Received 2 Likes
on
2 Posts
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Originally posted by Freeze
I concur.
I concur.
If you dont have anything useful to add to the post, and you arent willing to try to help with the topic, what makes you think we're going to care if you like them or not ....
#12
Supreme Member
Join Date: Apr 2003
Location: Oregon
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Car: GM & Jaguar
Engine: Various
Transmission: Various
Axle/Gears: Various
Well put Z28. As far as the lights are concerned; Gimme Gimme! I sent an email concerning the dimensions on the Tahoe, and Astro headlights. I will post a reply if I receive one.
#13
Supreme Member
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
Originally posted by TunedPort 335
My dad has a 1994 Chevy Silverado, and I measured his headlights the other day.
Personally I don't think they're wide enough and tall enough to look good on our cars. It would have alot of "empty space" around them.
I'm gonna swap in Celebrity lights or Monte LS lights instead.
My dad has a 1994 Chevy Silverado, and I measured his headlights the other day.
Personally I don't think they're wide enough and tall enough to look good on our cars. It would have alot of "empty space" around them.
I'm gonna swap in Celebrity lights or Monte LS lights instead.
I'm looking to use them in the KITT nose on the 82. Those lights in the gun metal grey might look tight! Hmmm!
$209.00 a set. Whoa! I can do that though! Matrix Racing, ok I will remember that!
#14
Member
Join Date: Jul 2000
Location: Buffalo, New York, USA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
I think im the only one whose not in to all the funky lights. I like the Monte / Caprice / regular Pickup light swaps, just beacuse i think the cars look great with the one piece light in the bucket.... But the entire rage of creating lights that are circles in squares, or halos, or cat eye styles, or whatever...
I dunno, it never looked right to me.
I dunno, it never looked right to me.
#15
Supreme Member
Join Date: Jan 2001
Location: St Catharines, ON
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
Originally posted by admrlam
I think im the only one whose not in to all the funky lights. I like the Monte / Caprice / regular Pickup light swaps, just beacuse i think the cars look great with the one piece light in the bucket.... But the entire rage of creating lights that are circles in squares, or halos, or cat eye styles, or whatever...
I dunno, it never looked right to me.
I think im the only one whose not in to all the funky lights. I like the Monte / Caprice / regular Pickup light swaps, just beacuse i think the cars look great with the one piece light in the bucket.... But the entire rage of creating lights that are circles in squares, or halos, or cat eye styles, or whatever...
I dunno, it never looked right to me.
#17
Supreme Member
Join Date: Jan 2001
Location: St Catharines, ON
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
Originally posted by tpiroc
Why be stock.
Why be stock.
#18
Supreme Member
Join Date: Apr 2003
Location: Oregon
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Car: GM & Jaguar
Engine: Various
Transmission: Various
Axle/Gears: Various
Originally posted by 85_ZED28
not everyone is interested in just looks, some like going fast first
not everyone is interested in just looks, some like going fast first
#19
Supreme Member
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by redraif
What size did you come up with?
I'm looking to use them in the KITT nose on the 82. Those lights in the gun metal grey might look tight! Hmmm!
$209.00 a set. Whoa! I can do that though! Matrix Racing, ok I will remember that!
What size did you come up with?
I'm looking to use them in the KITT nose on the 82. Those lights in the gun metal grey might look tight! Hmmm!
$209.00 a set. Whoa! I can do that though! Matrix Racing, ok I will remember that!
For some reason the numbers 4" tall and 11" wide stick in my head.
My dads Silverado is a few towns away right now, so I can't measure them at this moment
#20
Supreme Member
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
Cool! Thanks! Our 1990 Chevy truck has the headlight blackouts on it, so I can't measure it. They wrap around the side markers too! I had them fly off a few times, so I got some rubber edging from GTStylings and glued it on and then put them on the truck. Well now they are permenant! You can't even pull them off w/o breaking them!
I like them well enough though. I like how they meet the graphite grill and form black bands across the whole grill. Then the chrome just frames it. This truck has by far my favorite grill for the Trucks of this body style. Though with these graphite lights I could upgrade w/o the sacrafice of poor lighting I have now! I'm sure someone make the turn signal lights in the graphite as well, then the side markers I could got clear or smoked! Hmm! That is if I can get the darn light covers off!
I like them well enough though. I like how they meet the graphite grill and form black bands across the whole grill. Then the chrome just frames it. This truck has by far my favorite grill for the Trucks of this body style. Though with these graphite lights I could upgrade w/o the sacrafice of poor lighting I have now! I'm sure someone make the turn signal lights in the graphite as well, then the side markers I could got clear or smoked! Hmm! That is if I can get the darn light covers off!
#23
Okay,
I went out and measured the stock lights on my Tahoe - and they are 12 7/8" x 3 3/4".
Snapped a picture of the car/lights while I was out there too
BTW, the blacked-out Sport grille is my favorite on the full size Chevys - so I jumped right on it when I found this '95 2d Tahoe Sport 4x4 last year!! It's getting a light-upgrade soon to all clears and a grille insert.
Anyways, sorry for hi-jacking my thread
Ken
I went out and measured the stock lights on my Tahoe - and they are 12 7/8" x 3 3/4".
Snapped a picture of the car/lights while I was out there too
BTW, the blacked-out Sport grille is my favorite on the full size Chevys - so I jumped right on it when I found this '95 2d Tahoe Sport 4x4 last year!! It's getting a light-upgrade soon to all clears and a grille insert.
Anyways, sorry for hi-jacking my thread
Ken
#27
Supreme Member
iTrader: (13)
Nobody asked.
#29
Supreme Member
Join Date: Jun 2002
Location: Illinois
Posts: 4,028
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1988 Trans Am
Engine: 305 TPI
The Halo around non circular lights looks weird. Even though I have a bird, I am intrigued by the fixed headlights. I would like some more lightening at night, especially since I don't have an extra set of driving lights.
I like the Silverado swap.
I like the Silverado swap.
#30
Supreme Member
iTrader: (2)
Join Date: Jan 2001
Location: Tampa, FL, USA
Posts: 4,149
Likes: 0
Received 2 Likes
on
2 Posts
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Originally posted by mw66nova
personally, i think that you are more of a butthole by saying bad things to people who have an open opinon than those of us who enjoy the way a stock camaro looks. i have been racking my brain trying to fit "mighty mouse" under my flat hood cause i think it looks better. unfortunatly, i cannot.
personally, i think that you are more of a butthole by saying bad things to people who have an open opinon than those of us who enjoy the way a stock camaro looks. i have been racking my brain trying to fit "mighty mouse" under my flat hood cause i think it looks better. unfortunatly, i cannot.
This post was created to give those of us who arent afraid to try something a bit different another idea, Ken had a great idea in it, and now we'll see who ends up being the first to do it, i'd like to but i've got a few more suspension / go fast goodies to get first, so if someone else beats me to it, so be it, this isnt an opinion post, nobody asked for opinions, it was a TECH post on the possibility of getting them to fit and the possible modifications required, if you want an opinion post please go start your own.
#31
Senior Member
Join Date: Aug 2002
Location: Tampa, Florida
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc-Z
Engine: 355ci
Transmission: WC-T5
no kidding, how about instead of writing comments, maybe we all can help each other in figuring out how to put in a headlight like this OR a different style.. ey?
#32
Ok, well let me add a little tech here.....
They can fit but as seen from mine, some people complained they didn't fill up the whole space....
I decided to remedy the problem by using weatherstripping around the headlights...
You will need to custom make the brackets, which can be done rather easily, you can screw them into black plastic piece that's behind the headlights...
Although i have no figured out a way to adjust the headlights with moving the brackets....
They can fit but as seen from mine, some people complained they didn't fill up the whole space....
I decided to remedy the problem by using weatherstripping around the headlights...
You will need to custom make the brackets, which can be done rather easily, you can screw them into black plastic piece that's behind the headlights...
Although i have no figured out a way to adjust the headlights with moving the brackets....
#33
Senior Member
Join Date: Apr 2002
Location: Hamilton, Ontario, Canada
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Car: '90 Trans Am GTA
Engine: LB9
Transmission: 700R4
Axle/Gears: 2.73's
Originally posted by Z28*****
This post was created to give those of us who arent afraid to try something a bit different another idea, Ken had a great idea in it, and now we'll see who ends up being the first to do it, i'd like to but i've got a few more suspension / go fast goodies to get first, so if someone else beats me to it, so be it, this isnt an opinion post, nobody asked for opinions, it was a TECH post on the possibility of getting them to fit and the possible modifications required, if you want an opinion post please go start your own.
This post was created to give those of us who arent afraid to try something a bit different another idea, Ken had a great idea in it, and now we'll see who ends up being the first to do it, i'd like to but i've got a few more suspension / go fast goodies to get first, so if someone else beats me to it, so be it, this isnt an opinion post, nobody asked for opinions, it was a TECH post on the possibility of getting them to fit and the possible modifications required, if you want an opinion post please go start your own.
By the way, that was one hell of a run-on sentence there.
#35
Supreme Member
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
Wow I so have to do something other then those blackouts. I was moving Joe's 85TA (engineless) this weekend with the dually. We were out in the boonies and I could not see for crap! Those black outs are really just too dark!
Procar parts has some angel eyes 88-98 lights too!
http://www.procarparts.com/store/dis...EUCL-AEXX-HL21
Just in the clear chrome... no carbon fiber or gunmetal...
they are only $149.95 though!
I was trying to find some gunmetal or smoked parking lamps to match the gunmetal angle eyes for the 90 Dually and am not having any luck. I found diamond clear parking lights
and side markers.
.
But nothing in gunmetal or smoked. If anyone finds any let me know! I guess worse comes to worse i could use a light coat of night shade. I just hate to spend the $ and then spray them...
Chevy ken...thanks for the dimensions!
Procar parts has some angel eyes 88-98 lights too!
http://www.procarparts.com/store/dis...EUCL-AEXX-HL21
Just in the clear chrome... no carbon fiber or gunmetal...
they are only $149.95 though!
I was trying to find some gunmetal or smoked parking lamps to match the gunmetal angle eyes for the 90 Dually and am not having any luck. I found diamond clear parking lights
and side markers.
.
But nothing in gunmetal or smoked. If anyone finds any let me know! I guess worse comes to worse i could use a light coat of night shade. I just hate to spend the $ and then spray them...
Chevy ken...thanks for the dimensions!
Last edited by redraif; 06-23-2003 at 12:17 PM.
#36
Senior Member
Join Date: Apr 2002
Location: Los Angeles, CA/San Diego
Posts: 803
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1982 Pontiac Trans Am
Engine: Stock carbed 305
Transmission: Stock 200C
I thought some of you guys want to see this. Check it out
http://www.laureneng.com/flash/chevy.../composite.htm
http://www.laureneng.com/flash/chevy.../composite.htm
#37
TGO Supporter
Join Date: Jan 2001
Location: Mesa, AZ
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SC82TA
I thought some of you guys want to see this. Check it out
http://www.laureneng.com/flash/chevy.../composite.htm
I thought some of you guys want to see this. Check it out
http://www.laureneng.com/flash/chevy.../composite.htm
#38
Supreme Member
Join Date: Jan 2001
Location: St Catharines, ON
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
Originally posted by SC82TA
I thought some of you guys want to see this. Check it out
http://www.laureneng.com/flash/chevy.../composite.htm
I thought some of you guys want to see this. Check it out
http://www.laureneng.com/flash/chevy.../composite.htm
#41
Member
Join Date: Feb 2002
Location: BC Canada
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: ......
Transmission: ......
Ive done the celebrity light swap and i like it better than the chevy pickup swap due to the more spance being filled and less gaps. Check picks out at http://www.fbody.com/members/gclarke
I had it done in a few hours.
I had it done in a few hours.
#42
Moderator
iTrader: (3)
Celebrity swap? Maybe you didn't notice, but this is a TRUCK headlight swap thread.
JK
I've noticed in the last few weeks that these boards have been a LOT more civil!!! :rockon: Nobody has been flaming, and I think were all getting along pretty good.
That's my OPINION.
I don't think a "stock looks better" comment really requires moderation. Quit trying to stir up trouble.
See, now I had to post off topic. D a m n.
JK
I've noticed in the last few weeks that these boards have been a LOT more civil!!! :rockon: Nobody has been flaming, and I think were all getting along pretty good.
That's my OPINION.
I don't think a "stock looks better" comment really requires moderation. Quit trying to stir up trouble.
See, now I had to post off topic. D a m n.
#43
Originally posted by ChevyKen
Just adding another one I came across. Seems like the ones Flyinlow has, but in partial black..
Ken
Just adding another one I came across. Seems like the ones Flyinlow has, but in partial black..
Ken
The hood doesn't come down all the way like a stock hood, so that's why it looks like there is a big gap there......
#46
Supreme Member
Join Date: Apr 2003
Location: Oregon
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Car: GM & Jaguar
Engine: Various
Transmission: Various
Axle/Gears: Various
Just in a common two piece setup, the only other one in two pieces has a rectangular halo. I thought about using the projector from a mid 90's 300ZX and one 'euro' 4x6 but never had much luck getting a pair of projectors.
#48
Supreme Member
iTrader: (13)
you know what? those doen't look half bad. hey tpiroc, where did you get those lights and how much did you give for them? they give a stock appearance with a little flavor, a little jazz. i like those alot.
didn't mean to be such a butthole ealier in the psot. i go back and read them now and i looked like a complete idiot.
didn't mean to be such a butthole ealier in the psot. i go back and read them now and i looked like a complete idiot.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
knight72
Engine/Drivetrain/Suspension Wanted
0
08-10-2015 09:32 PM