Firebird 6" thick parts book
#202
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
11sORbust ,
Shifter boot...
If you have the auto it's 10125297
I you have the 5-spd it's 10125256
Which trim pieces are you looking for? If it's for the door stuff then the pic is below. If you need more let me know exactly what you need.
Do you have power seats? Or manual?
Gain switch is 10035312.
Diagram
List pg 1
List pg 2
Maverick H1L ,
The part numbers you need start at section 3.300
Diagram
List pg 1
List pg 2
List pg 3
This was the hardest look-up yet...phew.
Shifter boot...
If you have the auto it's 10125297
I you have the 5-spd it's 10125256
Which trim pieces are you looking for? If it's for the door stuff then the pic is below. If you need more let me know exactly what you need.
Do you have power seats? Or manual?
Gain switch is 10035312.
Diagram
List pg 1
List pg 2
Maverick H1L ,
The part numbers you need start at section 3.300
Diagram
List pg 1
List pg 2
List pg 3
This was the hardest look-up yet...phew.
#203
Supreme Member
Join Date: Nov 2003
Location: STL area
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
Which trim pieces are you looking for? If it's for the door stuff then the pic is below. If you need more let me know exactly what you need.
Do you have power seats? Or manual?
THANKS! :hail: :hail: :hail:
#204
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
It only shows one side...in this case being the passenger. All of the part #'s you need for either side should be listed.
What 'mirror thingy' are you talking about that's not in that pic? Also, could you possibly have the 91-92 arm rests?
The covers for the seat tracks are 20206219 for driver side and 20206218 for passenger side.
What 'mirror thingy' are you talking about that's not in that pic? Also, could you possibly have the 91-92 arm rests?
The covers for the seat tracks are 20206219 for driver side and 20206218 for passenger side.
#205
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Thx a bunch. I needed the # 55 in that diagram, the fuel block. I just hope it doesn't cost me a limb or two, I need them!
Edit: I just looked it up, and it's going to cost me an arm ($51.50) to stop my fuel leak at that return fitting! AARGH!
I also thing he's looking for the remote mirror control stick assembly or trim. Mine works, but it doesn't becuase the hardware I got for the stick doesn't match that which came original from GM, but as long as it stays in one place I could care less. There's a clip that holds the stick assembly to the door panel bracket which I need the part number for and the bracket P/N would help too.
Edit: I just looked it up, and it's going to cost me an arm ($51.50) to stop my fuel leak at that return fitting! AARGH!
I also thing he's looking for the remote mirror control stick assembly or trim. Mine works, but it doesn't becuase the hardware I got for the stick doesn't match that which came original from GM, but as long as it stays in one place I could care less. There's a clip that holds the stick assembly to the door panel bracket which I need the part number for and the bracket P/N would help too.
Last edited by Maverick H1L; 12-01-2003 at 11:12 PM.
#206
Supreme Member
Join Date: Nov 2003
Location: STL area
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
What 'mirror thingy' are you talking about that's not in that pic? Also, could you possibly have the 91-92 arm rests?
The door panels are stock. The arm rest matches the DP. They are just some special option or something. The panel is in the diagram. But I guess the armrest might be on the list...
#207
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
In case you need to know, I have the door panel that is #9 in that diagram with the #8 trim.
Oh, and bust, I don't think that our arm rests were in that diagram, but I know Classic Industries has them listed as the 88-90 arm rest pads on page 64 of the 2003 catalog.
Oh, and bust, I don't think that our arm rests were in that diagram, but I know Classic Industries has them listed as the 88-90 arm rest pads on page 64 of the 2003 catalog.
Last edited by Maverick H1L; 12-01-2003 at 11:30 PM.
#208
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 11sORbust
I'm talking about the thing that controls the side mirror,manual one that moves drivers side mirror.
The door panels are stock. The arm rest matches the DP. They are just some special option or something. The panel is in the diagram. But I guess the armrest might be on the list...
I'm talking about the thing that controls the side mirror,manual one that moves drivers side mirror.
The door panels are stock. The arm rest matches the DP. They are just some special option or something. The panel is in the diagram. But I guess the armrest might be on the list...
#209
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
bust, if you are actually talking about the actual controls for the remote mirror, you either have to buy a new remote mirror or go to a junkyard and get an assembly for the controls or the entire mirror itself. If you buy just the controls, the are a PITA to install because there are three individual cables that each have their own channel in the base for the stick, and that base has a very stiff spring in it, almost as stiff as the ones I've seen used on B&S engine valves. The controls are not fun to play with, they hurt like heck!
#210
Supreme Member
Join Date: Nov 2003
Location: STL area
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
I think I found what you are looking for....they are called a escutcheon
bust, if you are actually talking about the actual controls for the remote mirror, you either have to buy a new remote mirror or go to a junkyard and get an assembly for the controls or the entire mirror itself. If you buy just the controls, the are a PITA to install because there are three individual cables that each have their own channel in the base for the stick, and that base has a very stiff spring in it, almost as stiff as the ones I've seen used on B&S engine valves. The controls are not fun to play with, they hurt like heck!
I do have an inside bead to a couple of dealerships. So I might get lucky and find some stuff they ordered and never installed.
#211
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 11sORbust
That is the name of my door panels? Where did you get that info??
That is the name of my door panels? Where did you get that info??
#214
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Re: Washer pump cover
Originally posted by ghettocruiser
Hi. I need the part number for the black plastic cover that goes over the wiper motor assembly and holds the washer pump in place. I have intermittent wipers. I broke mine changing the pump today. THANKS!!!
Hi. I need the part number for the black plastic cover that goes over the wiper motor assembly and holds the washer pump in place. I have intermittent wipers. I broke mine changing the pump today. THANKS!!!
#215
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Not exactly. I have the same wiper motor, the later thirdgen style with the washer pump mounted inside the housing for the wiper motor. I just don't have that part number to give if there actually is one...
#216
Supreme Member
iTrader: (4)
joshp14
Hey. I wish I had a pic. My camera isnt working. The black plastic cover I'm referring to is the outer most part in the area of the wiper motor. The cover houses the washer pump. The pump sits vertically in the cover and is held in by a small metal clip. I believe the cover actually protects the intermittent wiper circuit board. Today, after contacting the dealership, I learned that that cover actually comes with a new intermittent circuit board. It ranges from $70 - $90. SO...unless you can find me a separate part number for the cover...Im stuck going to the junk yard. No biggie...I have a whole list of stuff I need. Just thought Ide look at all my options. Thanks for helping!
Justin
Justin
#217
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
This is going to be tough to describe, but I need the fifth piece of the Firebird air dam. I have P/N's 10118485, 10118488, and 10118489 and the other lower one (I don't know the P/N offhand), but I need the P/N for the one in the center that is shaped something like a Z and goes from the top front of the rad support to the bottom center of the front bumper cover.
#221
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Ooh, that's just great. Those numbers would help, except I don't have an RPO sticker. I'm looking to get that, the tire loading sticker, and the manual ASAP, but can you define those RPO codes for me?
#222
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Maverick H1L
Ooh, that's just great. Those numbers would help, except I don't have an RPO sticker. I'm looking to get that, the tire loading sticker, and the manual ASAP, but can you define those RPO codes for me?
Ooh, that's just great. Those numbers would help, except I don't have an RPO sticker. I'm looking to get that, the tire loading sticker, and the manual ASAP, but can you define those RPO codes for me?
WS4 - Trans Am
W66 - Formula
Hopefully you can distinguish the difference.
#223
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
I hope I get this right... TransAm has GFX, right? I don't have that, meaning I have the W66 option.
I just checked both numbers on GMPartsDirect, and neither are in their database. I'll have to get the numbers crossmatched at the dealer.
I just checked both numbers on GMPartsDirect, and neither are in their database. I'll have to get the numbers crossmatched at the dealer.
Last edited by Maverick H1L; 12-14-2003 at 10:58 PM.
#224
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Maverick H1L
I hope I get this right... TransAm has GFX, right? I don't have that, meaning I have the W66 option.
I just checked both numbers on GMPartsDirect, and neither are in their database. I'll have to get the numbers crossmatched at the dealer.
I hope I get this right... TransAm has GFX, right? I don't have that, meaning I have the W66 option.
I just checked both numbers on GMPartsDirect, and neither are in their database. I'll have to get the numbers crossmatched at the dealer.
Last edited by joshp14; 12-14-2003 at 11:11 PM.
#225
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
I am not quite sure as to whether I need one or not because my car appears to have had the front bumper cover replaced along with the bumper itself, and both say they are from a TransAm. I also had to replace the air dam because I did not have one when I bought the car and I had problems with engine heat. Some said I needed it, some didn't. Maybe you can help with this dilemma?
#226
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Well, that piece is supposedly what directs the most of the air into the radiator. I say get it if you are having problems with engine overheating. If not, I say dont get it.
#227
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Well, I haven't gone anywhere since I last drove it in Sept, before I got the air dam I have now. But I do know that there are some Christmas tree clips on the rad support that appear like they are in the shape of that deflector... I'll wait until the next time I drive the car in the Spring to see how the heat does and whether I really need it or not.
#228
Supreme Member
Join Date: Jun 2001
Location: CT
Posts: 1,383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Trans Am WS6
Engine: 305HO L69
Transmission: T5
would that book list a part number for an ecm wiring harness for an 85 trans am with an L69 (VIN code G), 5 speed tranny, and a/c?
#230
Junior Member
Join Date: May 2003
Location: Huntinton, NY
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Its cool to see someone helpful with the Manuals. All I know is thank *** for the SI2000 system, those books get real annoying real quick. That and you print out the page you want and you dont have to worry bout keeping it clean
#232
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Diabolical
where would one get this SI2000 system? or is that something that only gm shops have?
where would one get this SI2000 system? or is that something that only gm shops have?
I have access to it if you need sumthing for newer cars, but anything concerning our cars...prolly not.
Dale, sorry about the wait, I'll try to get back to you tonight.
-Josh
#233
Member
Join Date: Sep 2002
Location: White Rock, BC
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA
Engine: 305 TPI
I have an '88 gta. it's missing the front air deflector, looking around i think ive found the right one, i just need to make sure before i order it because theres no picture of it on the site.
The part # is 10118485. Will this fit my car properly?
Thnx
The part # is 10118485. Will this fit my car properly?
Thnx
#234
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Fat, you also need P/N's 10118488 and 10118489 to complete the air deflector if it is missing. The 10118485 is the lowest center piece of the four.
#235
Supreme Member
Join Date: Jun 2002
Location: North East GA
Posts: 2,221
Likes: 0
Received 44 Likes
on
40 Posts
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
What are the part numbers to all 4 black plastic bumper inserts on an 1989 formula. I know its a different number on all 4, 2 for the front and 2 for the rear.
#236
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Aviator857
What are the part numbers to all 4 black plastic bumper inserts on an 1989 formula. I know its a different number on all 4, 2 for the front and 2 for the rear.
What are the part numbers to all 4 black plastic bumper inserts on an 1989 formula. I know its a different number on all 4, 2 for the front and 2 for the rear.
LF-10030563
RR-10030541
LR-10030542
Sorry about the delayed response, I was in Hawaii from the 4th til yesturday.
#237
Supreme Member
Join Date: Jun 2002
Location: North East GA
Posts: 2,221
Likes: 0
Received 44 Likes
on
40 Posts
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
No Problem thanks for the numbers. Unfortantlly the one I really need is the one GM doesn't have, the RR isn't coming up on gmpartsdirect.com
#238
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Okay, the V6 finally crapped out on me (honestly, I did NOT know about the leaking evap can!) and I need to know the P/N's for V8 frame mounts, preferably within the next week please.
#239
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Maverick H1L
Okay, the V6 finally crapped out on me (honestly, I did NOT know about the leaking evap can!) and I need to know the P/N's for V8 frame mounts, preferably within the next week please.
Okay, the V6 finally crapped out on me (honestly, I did NOT know about the leaking evap can!) and I need to know the P/N's for V8 frame mounts, preferably within the next week please.
#243
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by omnipotentgoku
Can you find the part number for the window felts of an 87? There was also a window guide, kinda looked like a roller, that I need a PN for if you can find it.
Can you find the part number for the window felts of an 87? There was also a window guide, kinda looked like a roller, that I need a PN for if you can find it.
i'm not sure on what roller part you are talking about.
#244
Hey Josh, I'm gonna thank you in advance as I jump on this part # band wagon.
1991 Firebird, 305 TBI, Auto, T-Top
Trunk Weatherstrip (on body, not on hatch)
Driver's Door Electric Lock Switch
Driver's Door Drink/Map holder
Screw that holds sun visor to retainer bar
Thanks
1991 Firebird, 305 TBI, Auto, T-Top
Trunk Weatherstrip (on body, not on hatch)
Driver's Door Electric Lock Switch
Driver's Door Drink/Map holder
Screw that holds sun visor to retainer bar
Thanks
#245
#247
Member
Join Date: Sep 2002
Location: Lehigh Valley, PA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Firebird S/E
Engine: LG4 TPI Conversion
Transmission: 700r4
Axle/Gears: 3.42 SLP Posi 10 Bolt
Need ECM #'s
Do you have the numbers for the AUJP memcal for the '730 ecm?
#248
Senior Member
Join Date: Feb 2003
Location: NJ fo0
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986/88 Frankenstein Trans Am
Engine: carbed L98
Transmission: T-5
ugh...i hate to dump a crap load of stuff on top of whats already posted josh, but i desperately need these part numbers for my car:
in the transmission, in the shifter assembly: i need the little spring and the ball bearing that go underneath the shifter block (they work together to create the shift gates)
thanks a lot.
in the transmission, in the shifter assembly: i need the little spring and the ball bearing that go underneath the shifter block (they work together to create the shift gates)
thanks a lot.
#249
Supreme Member
Thread Starter
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
wow i need to pay more attention to this thread....
Savannah Dan
1. 10156321
2. When you say switch I assume you mean the button on the door - 20344293
3. Black – 10125159
Med. Beachwood – 10125161
Med. Dk Grey – 10125163
Med. Beige – 10181885
4. Well it shows me the visor and all the hardware…and even the screws that hold the bracket to the roof, but not the screw that holds the visor to the bar support. :scratchhead:
OUTATIME GTA
No luck on the lamp, couldn’t find it anywhere. L
Omnipotentgoku
Keep in mind this is a firebird book, not camaro, but here is the door drawing for the 87 bird.
Illustration
List #1
List #2
86BirdSE
The only AUJP I found was under the 1991 model year….
Production ecm # - 16125181
Service controller ecm # - 1227730
service calibrator # - 16151348
production calibrator prom code # - 1350AUJP
Trans_AM_88
I assume you mean the ball and spring for the detents…if so the spring is 14050769 and the ball (3/8”) is 7826284.
Savannah Dan
1. 10156321
2. When you say switch I assume you mean the button on the door - 20344293
3. Black – 10125159
Med. Beachwood – 10125161
Med. Dk Grey – 10125163
Med. Beige – 10181885
4. Well it shows me the visor and all the hardware…and even the screws that hold the bracket to the roof, but not the screw that holds the visor to the bar support. :scratchhead:
OUTATIME GTA
No luck on the lamp, couldn’t find it anywhere. L
Omnipotentgoku
Keep in mind this is a firebird book, not camaro, but here is the door drawing for the 87 bird.
Illustration
List #1
List #2
86BirdSE
The only AUJP I found was under the 1991 model year….
Production ecm # - 16125181
Service controller ecm # - 1227730
service calibrator # - 16151348
production calibrator prom code # - 1350AUJP
Trans_AM_88
I assume you mean the ball and spring for the detents…if so the spring is 14050769 and the ball (3/8”) is 7826284.
#250
Member
Join Date: Sep 2002
Location: Lehigh Valley, PA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Firebird S/E
Engine: LG4 TPI Conversion
Transmission: 700r4
Axle/Gears: 3.42 SLP Posi 10 Bolt
AUJP memcal
you might want to pencil this into your book:
Memcal is 16151348. It fits TPI motors with 700r4 transmissions. It is still availible from GM through gmpartsdirect.com at about 50$ shipped.
Memcal is 16151348. It fits TPI motors with 700r4 transmissions. It is still availible from GM through gmpartsdirect.com at about 50$ shipped.