DiabloWS6

iTrader: (8)

I was mocking and test fitting my supperram intake manifold and it wouldn't clear my 113 vette heads i noticed it had more material on the intake bolts thus not being able to clear is it ok if i grind them down a bit on the outside to make it flush like the oem intake manifold

Street Lethal

iTrader: (16)

You'll be fine, just be sure to use a strong washer with each bolt that will cover the larger diameter of each bolt hole your increasing in size, just in case the bolts themselves that your using have smaller heads on them than what will now be needed. Unless you mean the sides of the intake are hitting the valve cover, then yes, just grind them down.

PAFORM350

How about the accel superman on eBay for $3600.lmfao

DiabloWS6

iTrader: (8)

Thanks for the help yes i meant the side of the manifold. I will slightly grind them down just enough for it to make a nice contact with the block/heads

DiabloWS6

iTrader: (8)

3,600 is that right?

TTOP350

iTrader: (8)

Its probably the complete stand alone setup that was ment to be put on a old non EFI car/truck.

DiabloWS6

iTrader: (8)

Oh i see u was like wtf

DiabloWS6

iTrader: (8)

I noticed that the intake manifold has another water passage on the passenger side front of the manifold the oem does not have it can i just plug it up

TTOP350

iTrader: (8)

Its for a few different applications and yrs so it will have some things not used.

DiabloWS6

iTrader: (8)

That's great info i was looking at pics to get a reference but could not come up with anything thaks TTOP350 for the info

PAFORM350

pretty sure he's got the DFI spate. Either way I'm sure he will have it awhile at that price. Ridiculous