"ebay" switchback front markers
#1
"ebay" switchback front markers
These https://www.ebay.com/itm/176066718538
Got them earlier this week and been playing around with them. I dont like the double bar look and not really crazy about the white LEDs either , so there goes the switchbacks, but i can live without that. Short vid w/ one almost done and the side marker dismounted to show them "working" together. On the left edge you can just see the dr.side marker, at about 10sec it shuts off (driving lights turned off, back on at 16sec). I sharpied the white LEDs and the OE diffuser lens orange.
Got them earlier this week and been playing around with them. I dont like the double bar look and not really crazy about the white LEDs either , so there goes the switchbacks, but i can live without that. Short vid w/ one almost done and the side marker dismounted to show them "working" together. On the left edge you can just see the dr.side marker, at about 10sec it shuts off (driving lights turned off, back on at 16sec). I sharpied the white LEDs and the OE diffuser lens orange.
Last edited by 84 1LE; 12-25-2023 at 08:09 PM.
The following users liked this post:
Jaysz28 (12-25-2023)
#2
Junior Member
Join Date: Nov 2023
Location: South Florida
Posts: 1
Received 0 Likes
on
0 Posts
Car: 88 IROC-Z | 95 Corvette
Engine: 305 SBC | 350 LT1
Re: "ebay" switchback front makers
Great idea, I'm not a fan of the double bar look either, but the sequential turn signals adds a small modern touch to the car. How does the board look on the eBay set?
#3
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: Las Vegas
Posts: 2,675
Likes: 0
Received 242 Likes
on
182 Posts
Car: 1987 Formula (original owner)
Engine: 305 TPI
Transmission: T5
Axle/Gears: 9-bolt/3.45
Re: "ebay" switchback front makers
I think they present a very good look in the ad's pictures, simple, clean, modern. If I had a Camaro I might go for them. Do they not look as good in real life?
The only thing I don't care for is the sequential style flashing. Kind of gives a bit of a muddled appearance. I'd prefer a crisp on-off. Are you modding them? If so, in what way?
The only thing I don't care for is the sequential style flashing. Kind of gives a bit of a muddled appearance. I'd prefer a crisp on-off. Are you modding them? If so, in what way?
#4
Re: "ebay" switchback front markers
They're very nicely made actually and weren't bad looking with the black bar removed (its just a decal). Much nicer appearance with the solid white lens when lit, but not off. I debated leaving em that way, but i much prefer the stock look. So i took them apart and put the board in my stock markers. I didn't take many pics. Here of the decals has been removed as that marker was already disassembled. I,ll finish them tomorrow and make another vid.
Here's the board in the ebay housing I sharpied the white LEDs amber/org and also the diffuser lens from the OE lamps.
Everything, minus the housing.
Here's the board in the ebay housing I sharpied the white LEDs amber/org and also the diffuser lens from the OE lamps.
Everything, minus the housing.
The following users liked this post:
88irocmichael (12-25-2023)
The following users liked this post:
88irocmichael (12-27-2023)
Thread
Thread Starter
Forum
Replies
Last Post