3D Printed Cup Holder From Schipsoft That Integrates with Your Console
#1
Supreme Member
Thread Starter
3D Printed Cup Holder From Schipsoft That Integrates with Your Console
The lack of cup holder options has always been a pain in the a** with these cars, and this is the greatest solution I've ever seen. Not only is this Schipsoft product fantastic, but the guy (Robert) is also super helpful and accommodating. I was able to get in touch with him, and figure out that due to where my ignition is mounted, the standard cup holders wouldn't fit. He tweaked the design for me, and made one that did and BOY is it nice to have a real, legit, conveniently located cup holder in the ol' black sled of death. Apparently, a lot of people agree, because these pics of it have more likes than anything else I've ever posted about the car on Instagram 😂
Seriously get these. There are a few different versions for different applications, with phone holders, etc. They also make a single DIN radio adapter that moves the deck all the way up and has provisions to put buttons under it (which I'm going to do next).
Seriously get these. There are a few different versions for different applications, with phone holders, etc. They also make a single DIN radio adapter that moves the deck all the way up and has provisions to put buttons under it (which I'm going to do next).
Last edited by 383backinblack; 08-15-2021 at 02:55 PM. Reason: Typo
The following 2 users liked this post by 383backinblack:
BOOT77 (10-11-2022), NoEmissions84TA (08-15-2021)
#2
Supreme Member
iTrader: (1)
Join Date: Feb 2017
Location: Meriden, CT 06450
Posts: 4,034
Received 517 Likes
on
431 Posts
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
This I really like.
This is an adapter for third gen Camaro/Firebird stereo consoles, designed to fit two components simultaneously: one single DIN and one half DIN. The half DIN face opening is 6.75 x 0.9 Inches. Adapter may be flipped to place accessorie(s) either on the top or bottom.
This is an adapter for third gen Camaro/Firebird stereo consoles, designed to fit two components simultaneously: one single DIN and one half DIN. The half DIN face opening is 6.75 x 0.9 Inches. Adapter may be flipped to place accessorie(s) either on the top or bottom.
The following users liked this post:
1989karr (08-17-2021)
#3
Supreme Member
Join Date: Feb 2005
Location: Hawaii
Posts: 2,313
Received 159 Likes
on
148 Posts
Car: 89' Firebird
Engine: 3.4L V-6
Transmission: 700-R4
Axle/Gears: Whatever came stock!
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
This I really like.
This is an adapter for third gen Camaro/Firebird stereo consoles, designed to fit two components simultaneously: one single DIN and one half DIN. The half DIN face opening is 6.75 x 0.9 Inches. Adapter may be flipped to place accessorie(s) either on the top or bottom.
This is an adapter for third gen Camaro/Firebird stereo consoles, designed to fit two components simultaneously: one single DIN and one half DIN. The half DIN face opening is 6.75 x 0.9 Inches. Adapter may be flipped to place accessorie(s) either on the top or bottom.
I like this......I'd like the pocket...... Will it fit the 85 - 92 Firebirds?
#4
Supreme Member
Join Date: Feb 2005
Location: Hawaii
Posts: 2,313
Received 159 Likes
on
148 Posts
Car: 89' Firebird
Engine: 3.4L V-6
Transmission: 700-R4
Axle/Gears: Whatever came stock!
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
aww dang i thought it was like a little pocket you could put like phones and stuff in
#5
Supreme Member
Thread Starter
#7
Supreme Member
Thread Starter
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
The following users liked this post:
1989karr (08-24-2021)
Trending Topics
#9
Junior Member
Join Date: Apr 2002
Location: Dickinson, North Dakota
Posts: 96
Likes: 0
Received 1 Like
on
1 Post
Car: RS
Engine: 305
Transmission: 5 speed
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
Where did you contact him? I tried to send him a PM on instagram and all I've gotten is crickets. Hasn't viewed nor obviously replied.
#10
Member
Join Date: Apr 2006
Location: New Hampshire
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: '83 Z28
Engine: 305
Transmission: 700r4
Axle/Gears: 3.23
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
I bought one of his cup holders. I got the one that replaces the ash tray. I haven't installed it yet, but it looks like a quality product
#11
Junior Member
Join Date: Dec 2016
Posts: 26
Likes: 0
Received 1 Like
on
1 Post
Car: 1983 Berlinetta
Engine: 305 Carbed
Transmission: Auto
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
Looks like he is running a sale right now on eBay, 10% off.
I just ordered one of the "no cut, no drill" cup holders.
I just ordered one of the "no cut, no drill" cup holders.
#12
Junior Member
Join Date: Jun 2012
Location: Calgary, Canada
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.7 litre
Transmission: Auto
Re: 3D Printed Cup Holder From Schipsoft That Integrates with Your Console
I just went on the site. So many choices of cup holders. I got the dual cup holder w/ USB charger for the automatic transmission. I had seen on other sites that the auto transmission couldn’t have the dual holders due to the transmission linkage. The site mentions the left cup holder is “shallower” to allow for the linkage. I am interested to see how this fits as was using an “ auto store seat insert” that wasn’t very stable and a few drips were spilled.
Snhipping from the States to Calgary, estimated to be here on the 29th. I have a few interior light upgrades planned for the winter when it is parked so this just got added to the “list”.
Snhipping from the States to Calgary, estimated to be here on the 29th. I have a few interior light upgrades planned for the winter when it is parked so this just got added to the “list”.
Thread
Thread Starter
Forum
Replies
Last Post