85Iroc-Z

iTrader: (4)

Anybody out there ever use the MSD Street Fire Plug wires sets? I am looking to install them on my motor after putting headers on, and I was wondering how they fit(too long, too short, just right)?

sweetaq

iTrader: (1)

Mine are alittle long but not too bad

Jonathan Dyer

iTrader: (5)

Same here, a couple are a little long but better than my last set. They are long enough to route back past the valve cover instead of going across it for a cleaner look than wires that are too short.
J

JohnyP

iTrader: (3)

i used them...buy the cut to length ones there way better and buy the wire looms from moroso they bolt on the valve covers like where the washer goes. they look sexy and the street fire cut to length mixed with those clean the bay up soooooo much looks so much better...just seperate the short wires from long and it comes with the little tool u need and all u need is a blade to cut them but its got a crimper and everything very easy to use and better than precuts

85Iroc-Z

iTrader: (4)

Thanks for the replies. I was planning on getting the cut to length ones.

IrS89IROC

I got the cut to length ones also. Great buy in my opinion. i routed them behind the valve covers also. looks very clean

joeyh2005

i had a question on these street fire wires which wires did you purchase i have a hei distributor, carb and intake and headers which part number should i order i seen part number 5570 but it didnt say anything on using on a hei distributor so any suggestions on which part number to order?

gmstrong

they are great wires.

joeyh2005

Does anyone have a part# for these wires????

85_ZED28

I ordered this set:

http://www.summitracing.com/parts/MSD-5566/

All 90 degree boots and longer length to go under the headers.

Guest

@85_ZED28

let me know how those wires work out for you as they are specifically for corvettes..

85_ZED28

Will do. I originally ordered MSD-5570 but they were too short to route under the headers.

joeyh2005

Any update on these wires designed for the vette?? Also can anybody. Recommend good spark plugs

midias

Any NGK plug recommended for your car should be just fine. Personally I stay away from gimmick plugs and Bosch unless I am driving a German car.

http://www.ngksparkplugs.com/

joeyh2005

Thanks for the recommendation

Ron U.S.M.C.

AC Delco standard plug is # R45TS and is one of the more popular plugs on this site. Absolutely no gimmicks here.Just a AC Delco Conventional resistor spark plug you can buy at any auto parts store for around $2.00 ea.
Also why does a plug wire set come without a coil wire ? = http://www.summitracing.com/parts/MSD-5566/

joeyh2005

Well. On my car it has a hei distributor. So I don't need a coil wire

Ron U.S.M.C.

Cool

85_ZED28

Just put them on this weekend. A couple of the wires were a bit long, but this set (MSD-5566) worked well for going under the headers like I wanted .

joeyh2005

yea i bought the 5570 and i routed them a diffrent way ima have to post pics when i get a chance too