Trick flow twisted wedge
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Reykjavík, Iceland
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro RS
Engine: 327
Transmission: T-56
Axle/Gears: Alloy axles, motive 3.73
Trick flow twisted wedge
I bought those heads for few years from a friend, and dont know anything about them, the only thing stamped on them is on the exhaust flange, SN27836 on one and SN27817 on the other.
I remember they have 2.02 and 1.6 valves. But cant find any more info about them and Trick Flow dont make them any more.
The only thing I found was that there were two generations, G1 and G2. And G1 had some known valve guide failiures...
So does any one know according to the serial number, witch generation are mine? All info will be great, chamber size, flow numbers and so on.
I remember they have 2.02 and 1.6 valves. But cant find any more info about them and Trick Flow dont make them any more.
The only thing I found was that there were two generations, G1 and G2. And G1 had some known valve guide failiures...
So does any one know according to the serial number, witch generation are mine? All info will be great, chamber size, flow numbers and so on.
#2
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
Re: Trick flow twisted wedge
trick flow could tell you if u give them those numbers.
I run a pair and make real good power with my 355. 352hp and 356 tq at the wheels.
I run a pair and make real good power with my 355. 352hp and 356 tq at the wheels.
#3
Junior Member
Join Date: Nov 2007
Location: Poland, ME
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Trick flow twisted wedge
the only twisted wedge heads i know of are for fords only but i am probably wrong
#4
Member
iTrader: (1)
Join Date: Dec 2001
Location: Finland
Posts: 456
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1985 Camaro Z-28
Engine: 385
Transmission: th700r4+Edge 2800 stall
Axle/Gears: 3.42
Re: Trick flow twisted wedge
Just look yesterday evening at -95 Hrm was test at trick flows twisted wedges.intake valve is 13 degree and exhaus is 23 degree.Intake flows same as unported factory vortec head,exhaust little better.Intake is 185cc.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM