Competition Engineering - SFCs
#1
Supreme Member
Thread Starter
Competition Engineering - SFCs
If you're running a set or know someone that is - - - How did they fit - specifically did you /they have to cut the floor pan? I'm not ******* their product, but I know how C/E is about "cutting to fit". They're also made from 2"x2" tubing,, most other SFC seem to be made from 1.5"x2.5",, did they seem to stick out any???
Thanks!!!!
Thanks!!!!
#2
Member
Join Date: Mar 2000
Location: Thomaston, GA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: Transformed 86 Coupe
Engine: 400 sbc
Transmission: 700R4
I've got a set that I'm supposed to be sending back. The 2x2 tubing is nothing more than straight pieces with angles cut on one end and plates welded on. The other end must be cut to length. And you have to do some SERIOUS cutting on the floor pan too. I could have made them in <30 minutes with $10 in materials.
There is a company called Chassis Engineering that has a weld in set that requires no floorpan modifications for about $10 more than the Competition Engineering ones. I'm considering getting them.
There is a company called Chassis Engineering that has a weld in set that requires no floorpan modifications for about $10 more than the Competition Engineering ones. I'm considering getting them.
#3
Supreme Member
Thread Starter
Thanks Hurtin - Some of their products are really good,, others are "cut to fit". Thanks for letting me know about the Chassis Eng SFC also. I appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post